10
6-3. To Program a transmitter with Bank information via receiver Infrared port
Step 1.
Press and hold the “Jog-wheel” for approximately 3
seconds if the receiver is not in mute to enter the
MAIN MENU. You will enter the MAIN MENU
immediately if the receiver is in mute.
Step 2.
Rotate the “Jog Wheel” till
TX SET
is underlined and
press to enter
TX SETTINGS
. With
FREQUENCY
underlined, press the “Jog Wheel”.
Step 3.
Align the transmitter and receiver infra-red windows
with the transmitter no more than 15 cm from the
receiver. With
SEND
underlined, press the “Jog Wheel” and wait a few seconds. All frequencies in the
bank selected will be transferred to the transmitter and its current frequency will be set to match the
receiver’s current frequency. The receiver will return to its main display.
Note
If the receiver is currently in a
SINGLE
or
USER
frequency, it will transfer the
USER
bank.
