13
desired source is displayed, press the Set key to change the setting.
If the Word Clock signal is not correctly supplied when set to “External,” the band indicator,
antenna attenuator indicator and RF cascade indicator flash to indicate a signal supply
error. Press the Left key to navigate back up the menu structure.
6.3.7 Transmitter Status Confirmation
The status of the transmitter from which each module unit is receiving a radio signal is
displayed.
From “Top Menu 5 TX Status” press the Right key to show transmitter status. The upper
row displays Unit 1, and the lower row displays Unit 2.
Each module unit has three display items, which are (from left to right): transmitter cover
status (open - OPN, or closed - CLS), transmitter type (handheld - HD, or belt-pack - BT)
and transmitter gain value. Press the Left key to navigate back up the menu structure.
6.3.8 User Name Settings
Set each module unit’s name.
From “Top Menu 7 User Name” press the Right key to show the screen below. Display the
module unit for which the name is to be set using the Up and Down keys.
When the desired module unit is displayed, press the Right key.
The flashing cursor (_), which indicates the name edit status, is displayed.
Move the cursor to the desired entry position using the Left and Right keys, then select the
character to be entered using the Up and Down keys.
Press the Set key to confirm the setting change.
The display reverts to the unit selection mode. Press the Left key to navigate back up the
menu structure.
U 2
U 1
:
:
d
B
L
C
S
T
B
5
3
-
P
O
N
D
H
d
B
5
1
-
U
1
1
N
E
A M
>
<
V O X
M
C
I
E R
S
U
1
1
N
E
A M
V O X
M I
C
E R
S
]
[
U
1
2
N
E
A M
V O X
M I
C
E R
S
]
[
V O X
M I
C
U
1
N
E
A M
>
E R
S
]
<
2
