10
6.1 Receiver Settings Changes and Confirmation
Two operation modes are available for receiver settings:
l
Local mode: Change and confirm settings using the receiver’s LCD screen and
keys.
l
Remote mode: Change and confirm settings using dedicated software installed on a
PC connected to the receiver via a network. (See the SD7000 Digital Microphone
Monitor Software Manual).
6.2 Basic Operation - Local Mode
Use the Left (
ÿ
) and Right (
÷
) keys to move between menu levels, the Up (
ù
) and Down
(
ü
) keys to select the items, and the Set key to confirm the settings values in the lowest
menu level.
(This does not apply to the keys used in user name settings explained later. Refer to the
section “6.3.8 User Name Settings” for more information.)
Press the power switch to turn on the power to the receiver.
Confirm that the front panel Remote indicator remains unlit (local mode). If the indicator is
lit (remote mode), follow the procedure below to switch the remote mode to local mode.
Press the Right key and enter the settings menu selection hierarchy, then display the “1 RX
CONTROL” indication using the Up and Down keys.
Press the Right key to enter the REMOTE/LOCAL settings hierarchy, then display the
“LOCAL” indication using the Up and Down keys.
Press the Set key to confirm the setting to “LOCAL.” An asterisk (*) is displayed, indicating
that the receiver has been set to local mode. The Remote indicator on the front panel turns
off.
Press the Left key to navigate back up the menu structure.
2
6 9
H
8
.
5
7
M
Z
U 2 :
2
6 9
H
8
.
5
7
M
Z
U 1 :
T O P
U
N
M E
1
R
O N
X
C
O
T R
L
S E L
T
E C
R X
T
C
R L
L
O
A
]
[
L
C
S E L
T
E C
R X
T
C
R L
L
O
A
]
[
L
C
*
