12
6.3.3 ID Number Settings
Set each module unit’s ID number.
From the “Top Menu 3 ID”, press the Right key to go to the ID selection screen. Using the
Left and Right keys, align the cursor with the module unit for which the ID is to be changed
and display the desired ID number using the Up and Down keys. Press the Set key when
the desired ID number is displayed to change the setting. Press the Left key to navigate
back up the menu structure.
Even if the set receiver and transmitter frequencies are identical, it is possible to choose
not to receive radio signals from an unwanted transmitter by making its ID number different.
Please note that two transmitters on the same frequency should not be used within the
same system.
6.3.4 Antenna Attenuator Settings
Set attenuator levels for each antenna input.
From the “Top Menu 4 Peripheral”, press the Right key to go to “Peripheral Menu” and use
Up or Down keys to go to “1 Antenna-Att”. Press the Right key to go to the antenna
selection screen. Move the cursor to the desired antenna using the Left and Right keys,
then display the attenuation to be set using the Up and Down keys. When the desired
attenuation is displayed, press the Set key to change the setting. Press the Left key to
navigate back up the menu structure.
6.3.5 Audio Output Level Settings
Set the audio signal level output from each module unit’s audio output terminal.
From the “Top Menu 4 Peripheral”, press the Right key to go to “Peripheral Menu” and use
Up or Down keys to go to “2 Output Level”. Press the right key to go to the selection
screen. Move the cursor to the module unit for which the output signal level is to be
changed using the Left and Right keys, then display the desired output level using the Up
and Down keys. When the desired output signal level is displayed, press the Set key to
change the setting. Press the Left key to navigate back up the menu structure.
6.3.6 Word Clock Settings
Set whether the receiver’s internal signal (Internal) or external device’s signal (External) is
used as a Word Clock (sampling clock signal for the digital audio signal output from the
AES/EBU output terminal).
From the “Top Menu 4 Peripheral”, press the Right key to go to “Peripheral Menu” and use
Up or Down keys to go to “3 Word Clk”. Press the right key to go to the selection screen.
Display the sampling clock signal source to be set using the Up and Down keys. When the
A
]
[
*
B
A N T -
A N T -
0
*
0
-
2
]
[
*
*
U 2
U 1
M I
C
M I
C
C L
K
]
[
*
I
T
L
A
N
R
E
N
W O R D
[
U 2
]
4
U 1
0
*
*
I
D
I
D
