G. STATION PROGRAMMING
26
your office, then enter a unique frequency. Valid settings are 1 through 8. If you do not
want to use this feature, simply press save at the Set Ring Frequency prompt.
2. For Operator:
→
→
,
→
→
→
→
or numeric (0 to 9)
→ →
Press
[PRG]
key then Dial
[8], [8]
.
Press a programmed DSS key (1-10)
or Dial the Speed Access Code (0 – 9).
Dial desired outside telephone number (Max.30 digits).
Press
[SAVE]
key.
Special Note: You will be prompted to enter a ring frequency level. This used for Caller
ID applications. If you would like the number you are storing to ring at your phone at a
specific ring frequency, then enter that frequency here and press save. For example,
you program your home number in DSS location 1 on your telephone. If you want your
phone to ring at a specific and unique frequency when someone from your home calls
your office, then enter a unique frequency. Valid settings are 1 through 8. If you do not
want to use this feature, simply press save at the Set Ring Frequency prompt.
To store System Speed Dial numbers (at Operator only):
→
→
,
→
→
→
→
SPD CODE(100 to xxx)
→ →
→
Press
[PRG]
key then Dial
[8], [7]
.
Dial System Speed Access Code then Press
[SAVE]
key.
Dial stored numbers (Max. 30 digits).
Press
[SAVE]
key to exit.
To define a specific CO line / Name for Speed Dialing:
•
After or before dialing stored telephone number, User can assign a CO line for
the stored numbers.
,
Press
[MIC/AT]
key then dial the CO line number
01-05 or 00 for Automatic CO Selection.
Or key in Name for this System Speed Dial.
To exit:
. Press
[SPK]
key.
All manuals and user guides at all-guides.com
all-guides.com
