background image

Tips: 

1. There are two users in total. Each user has 60 records. 

2. You can press “              ” button to stop measuring during the 

process of the measurement at any time.

3. If the measurement result is out of the measurement range 

(SYS: 60mmHg to 230mmHg; or DIA: 40mmHg to 130mmHg;or 

Pulse: 40-199 pulse/minute), the LCD will display “out”.

Note:

(1). The symbol “    ” will disappear after successful data transmission, and you may check 

       your personal health data stored in your mobile device.

(2). If the data transmission fails, the symbol “     ” will remain. The pending measurement 

      data will be transmitted to your mobile device when next measurement is complete.

(3). If you have set the [Positioning Symbol] on, when you start the measurement, the blood 

      pressure monitor will detect the position first. The wrist must beat the angle between 30° 

      and 45°. If it’s out of this angle, the LCD won’t start any measurements and will display 

      blinking symbol “        ”  until you have the correct position. If you get the correct position, 

      it will display “        ” for about 3 seconds, and then finish the whole measurement.  

      

   During the measurement or when the 

measurement is finished, press “          ”

button to turn off the monitor. Otherwise it will

power off in one minute.

3.

CAUTION

 

1. 

2.  

Interference may occur in the vicinity of equipment marked with the following symbol

     . And TMB-1598-BS may interfering vicinity electrical equipment.

Sensitive people, including pregnant women pre-eclamptic and those who implanted 

medical electronic instruments, should avoid using the unit whenever possible.

Keep the monitor at least 20 centimeters away from the human body (especially the 

head) when the data transmission is proceeding after measurement.

To enable the data transmission function, this product should be paired to Bluetooth 

end at 2.4 GHz.

How to mitigate  possible interference?

The range between the device and BT end should be reasonably close, from 1 meter 

to 10 meters. Please ensure no obstacles between the device and BT end so as to 

obtain quality connection and to lower the RF output range.

To avoid interference, other electronic devices (particularly those with wireless 

transmission / Transmitter) should be kept at least 1 meter away from the monitor. 

1

.

2

 

The 

corresponding 

time is 22:36.

The 

corresponding 

date is 8th 

May.

Press “         ” button or “        ” 

button to get the record you want.

When the monitor is off, 

press “        ” button to show 

the average value of the 

latest three measurement 

records. If the records are 

less than 3 groups, it will 

display the latest record 

instead.

The record number, time and 

date of the measurement records 

will display alternately.

The record 

number is 

No.1. Six 

records in 

total. 

Recall the Records

MEASUREMENT

16

17

DATA MANAGEMENT

Summary of Contents for TMB-1598-BS



















Reviews: