•
•
•
Installing and Replacing the Batteries
Replace the batteries whenever the below happen
The shows
The display is dim.
The display does not light up
CAUTION
Slide off the battery cover.
Install the batteries by matching the correct polarity, as shown
below. Always use the correct battery type (2×AAA batteries.)
Replace the cover.
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
The typical service life of the new and unused batteries
is 54 measurements for the operation time is 60s.
1
.
2
.
3
.
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned to
each record that is stored in the memory. (The setting range
of year is 2016 ~ 2056. Time format: 24H)
When the monitor is off, press “ ” button,it will display the time.Then
press and hold “ ” button to enter the mode for year setting.
Notes:
1.During the process of setting, you can press “ ” button to stop
setting at any time.
2. If there is no operation during the process of setting, it will turn off
within 1 minute.
Press “ ” button to change
the [YEAR]. Each press will
increase the numeral by one
in a cycling manner.
When you get the right
year, press “ ” button
to confirm and it will turn
to next step.
Setting Date, Time, Positioning Symbol and
Measurement Unit
BEFORE YOU START
BEFORE YOU START
8
9
