Rest for 5 minutes before
measuring.
Wait at least 3 minutes between
measurements. This allows your
blood circulation to recover.
For a meaningful comparison,
try to measure under similar
conditions. For example, take daily
measurements at approximately
the same time, on the same upper
arm, or as directed by a physician.
Tie the Cuff
1
.Tie the cuff on your upper arm,
then position the tube off-center
toward the inner side of arm in
line with the little finger.
2
.The cuff should be snug but not
too tight. You should be able to
insert one finger between the
cuff and your arm.
3
.Sit comfortably with your arm
resting on a flat surface.
2~3cm
4
.Correct position:
- Bare your arm or wear tights only
when starting measurement.
- Sit comfortably with legs
uncrossed, feet flat on the floor,
back and arm supported.
The center of the cuff should be at
the same level as the right atrium
of the heart.
Start Measurement
When the blood pressure monitor is off, press On/Standby button to
turn it on, it will finish the whole measurement.
LCD display
Adjust to zero.
Inflating and Measuring
Display and save the result.
MEASUREMENT
MEASUREMENT
11
10
