background image

4.

1 inch (2-3 cm) above the inside elbow. Then 

Make sure the bottom edge of the arm cuff

wrap the cuff securely.

You should be able to insert one finger between 
the cuff and your arm. 

Note:The cuff should be snug but not too tight.

1. Remove all jewelry, such as watches and bracelets

from your left arm.
Note: If your doctor has diagnosed you with poor
circulation in your left arm,use youre right arm

.

 

Roll or push up your sleeve to expose the skin. Make
sure your sleeve is not too tight. 

2.

on your upper arm, then align the air tube toward 

Hold your arm with palm facing up and tie the cuff 

the center of your arm.

 

3.

5. Sit upright in a comfortable chair with your back

against the backrest of the chair. Keep your feet
flat and your legs uncrossed.
Place your arm resting comfortably on a flat table.

the same level as your right atrium of the heart. 

The cuff worn on your arm should be placed at

6. Take 5-6 deep breaths and let's start measuring!

Note A:

and then it will turn off after about 5 seconds.

When you insert or replace batteries into the device, the LCD displays as below first, 

Note B:

turned off. If unsuccessful, the monitor will stop searching and enter the standby mode.

This device is equipped with function of  Measurement Reminder.  Contact Customer 
Support to enable or disable it, maximum 5 group of measurement Reminder (by default,
it is disabled).  

Once enabled, every day when the appointment time is reached, the blue LED of the 
device button will light up in the form of breathing light to remind the user to measure, 
and the breathing light will be cancelled after the startup or 30 minutes without operation.   
(If the user does not measure the blood pressure according to the reminder, the reminder 
icon of measurement will not be displayed when the user starts the measurement next time)  

The device will then search and pair with the mobile network automatically after it is 

BEFORE YOU START

MEASUREMENT

12

LCD display

•  

Take the measurement in a silent room.

•  

Be relaxed, Remain still and DO NOT talk while taking a measurement.

•  

For a meaningful comparison, try to measure under similar conditions. For example, 
take daily measurements at approximately the same time, on the same arm, or as 
directed by a  physician.    

•  

Rest for 5 minutes before a measurement.

Helpful tips to help ensure an accurate reading

12

5

11

Applying the cuff

2-3 cm (~1 inch)

Summary of Contents for TeleCuff Gen 2
















Reviews: