12
13
6.
Repeat step 2 and 3 to set the [HOUR] and [MINUTE].
5.
After hour and minute is set,the LCD will display “donE” first,
then display all the settings you have done and then turn off.
BEFORE YOU START
MEASUREMENT
mmHg
mmHg
/min
mmHg
mmHg
/min
mmHg
mmHg
/min
Applying the Arm Cuff
To achieve an accurate blood pressure reading, follow these steps to
position the blood pressure cuff properly.
1. Remove tight-fitting clothing or tight rolled up sleeve from your left
upper arm. Do not place the arm cuff over thick clothes.
2. Insert the air plug into the air jack securely.
3. Wrap the arm cuff firmly in place around your left upper arm.
The bottom edge of the cuff should be 2 to 3 centimeters (0.8 to
1.2inches) above the bend in your arm, and the tube and artery
marker should appear on your arm as shown.
Note: If your doctor has diagnosed you with poor circulation in your left
arm, please use your right arm.
4. Keeping the artery marker and the tube in place, wrap the cuff snugly
around your arm, but not too tight. If you can insert just two fingers
between the cuff and your arm, the tightness is acceptable.
