Upload Material
Note: Be sure that the units of the gauge are set for the same units
as the material you are uploading. If the gauge was set in U.S.
Customary units (ex: 150 lb/ft
3
) and you upload the material in SI
units (2402.8 kg/m
3
) the gauge will notify you that the density is out
of range. However, it will continue to load the material. If you switch
to SI units AFTER the material has been loaded, the density would
convert the 2402.8 as if it were in lb/ft
3
and will result in
38,489.2 kg/m
3
.
Correct this by deleting the material, change the units of the gauge
and reload the material or by simply editing the density in the
material setup.
17
