Release 3.0
PAGE 25
Setup
Aero 60/90/130
4.4.5 Front Pad Delay
FRONT PAD DELAY UP – causes printer to stop in the front and up position after printer has picked
up ink but before it has printed the part.
FRONT PAD DELAY DOWN – causes printer to continue pushing the pad down in the front and down
position while the printer is printing the part but before returning to the up position.
Note: Entering a value of zero will result in no delay
Note: Use this Down Dwell in conjunction with lowering the main air pressure in order to cause a “stall
on part” condition.
Touch Main Button to jump back to the MAIN screen
Touch arrow button to jump to the previous screen
4.4.6 Rear Pad Delay
REAR PAD DELAY UP – causes printer to stop in the rear and up position before printer has picked
up image.
REAR PAD DELAY DOWN – causes printer to continue pushing the pad down in the rear and down
position while the printer is picking up ink from the cliché for the length of time set, before returning to
the up position.
Note: Entering a value of zero will result in no delay
Note: Set this to zero if no Tape Cleaning device is installed. Use this delay to add more time to rear
pad down adjustment scale for ink pick-up if a Tape Cleaning device is installed. This is the time
