Release 3.0
PAGE 19
Operating Controls
Aero 60/90
4.2 The Operating Control Functions
Button
Description
Result
Touch Screen
Active when power is on
All setup, operating mode, start and stop
command and manual functions are input via
the touch screen.
E-Stop
Press to activate.
Pull to release.
Interrupts power to inputs and outputs.
Machine motion is immediately disabled.
The machine may continue to move for a short
distance after E-STOP is pressed.
Pad stroke down limit Adjust the pad down stroke
limit
Loosen lock screw before making adjustment.
Move slide up to shorten stroke.
Move slide down to lengthen stroke.
Tighten lock screw after making adjustment.
Flow controls
Adjust the speed of the pad
ram.
Adjust the speed of the pad
slide.
Loosen the lock ring.
Turn knurled screw clockwise to slow down
movement.
Turn knurled screw counterclockwise to speed
up movement.
Tighten lock ring after making adjustment
Foot Switch
And
START button on
control screen
Stop and start the printer.
When in single cycle mode, pressing the foot
pedal or the START button will start the print
cycle.
When in continuous cycle mode, pressing the
foot pedal once or pressing the START button
will start the print cycle.
Pressing the foot pedal again will stop the
printer at the end of the active step of the print
cycle. Press again to continue the print cycle.
