1800 816 277
www.tti.com.au
11
Product HandBook
DieselPatrol
™
•
Insert the diesel supply nozzle and commence filling the DieselPatrol tank.
CAUTION! To prevent overflow, do not leave the filling operation unattended.
•
An optional sight level tube is fitted to the rear of the tank, providing a visual indicator of the level of
diesel in the tank. If a sight level tube is not fitted, observe the diesel level directly in the tank. When the
tank is filled, close the diesel’s supply nozzle and remove.
•
Replace the DieselPatrol’s filler cap.
Figure 4 – Tank Filling Operation
Operation – electric pump
The DieselPatrol fitted with the standard electric pump is started as follows, refer to Figure 5:
•
Park the DieselPatrol and tow vehicle near the equipment to be refueled.
•
Open the ball valve on the tank’s discharge line.
•
Remove the DieselPatrol’s hose and nozzle from it’s stowed psoition, then insert the nozzle into the
equipment’s fuel tank.
NOTE! The tow vehicle’s ignition may need to be turned ON to supply power to the
DieselPatrol’s electric pump via the Anderson plug.
•
At the rear of the pump, press the control switch to ON. The pump will start operating, with the diesel
bypassing back into the DieselPatrol’s tank.
