1800 816 277
www.tti.com.au
13
Product HandBook
DieselPatrol
™
CAUTION! Ensure the engine’s throttle is set to idle if the engine is cold. Do not adjust
the throttle to maximum speed until the engine has warmed up.
•
Set the throttle lever to idle for cold starting. If restarting a warm engine, the throttle can be left at normal
engine operating speed.
•
Turn the power switch to ON. Pull the recoil starter handle until the engine starts, then back off the
choke lever to OFF.
NOTE! Until the hose nozzle is opened, water will circulate through the pump and
bypass back into the tank.
•
Set the throttle lever to idle for cold starting. If restarting a warm engine, the throttle can be left at normal
engine operating speed.
•
Turn the power switch to ON. Pull the recoil starter handle until the engine starts, then back off the
choke lever to OFF.
•
Once the engine is warmed up, adjust the throttle to increase the engine speed to normal operating revs.
With the engine running, the pump will operate with the diesel bypassing back into the DieselPatrol’s
tank.
•
When the engine needs to be stopped, turn the power switch to the OFF position.
If the DieselPatrol is not going to be used within the next few hours, shut the system down by turning the fuel
tap to OFF.
Figure 6 – Petrol Engine Start-up Procedure
