Transition Networks
SISTM1040-262D-LRT
24-Hour Technical Support: 1-800-260-1312
International: 00-1-952-941-7600
77
6.17 Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
Ingress Limit Frame type:
select the frame type that wants to filter. There are four
frame types for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast
and
Bbroadcast
only
types are only for ingress frames. The egress rate only supports
All
type.
All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate
Ingress:
Enter the port effective ingress rate (The default value is “0”).
Egress:
Enter the port effective egress rate (The default value is “0”).
And then, click
Apply
to apply the settings.
