24-Hour Technical Support: 1-800-260-1312
International: 00-1-952-941-7600
130
state
[Enable | Disable]
I
Use the state interface
configuration
command to specify
the state mode of
operation for Ethernet
ports. Use the disable
form of this command
to disable the port.
switch(config)#
interface
fastEthernet 2
switch(config-if)#
state Disable
show interface
configuration
I
show interface
configuration status
switch(config)#
interface
fastEthernet 2
switch(config-if)#
show interface
configuration
show interface status
I
show interface actual
status
switch(config)#
interface
fastEthernet 2
switch(config-if)#
show interface
status
show interface
accounting
I
show interface statistic
counter
switch(config)#
interface
fastEthernet 2
switch(config-if)#
show interface
accounting
no accounting
I
Clear interface
accounting information
switch(config)#
interface
fastEthernet 2
switch(config-if)#
no accounting
Trunk Commands Set
Commands
Level Description
Example
aggregator priority
[1~65535]
G
Set port group system
priority
switch(config)#
aggregator priority
22
aggregator activityport
[Group ID]
[Port Numbers]
G
Set activity port
switch(config)#
aggregator
activityport 2
