Transition Networks SISGM1040-244 User Manual Download

Page: 98 / 117

Transition Networks

SISGM1040-244

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

enabling. False is P2P disabling.

Edge:

The port directly connected to end stations cannot create bridging loop in the

network. To configure the port as an edge port, set the port to ‘

True

’ status.

Non Stp:

The port includes the STP mathematic calculation.

True

is not including

STP mathematic calculation.

False

is including the STP mathematic calculation.

6. Click

Apply

RSTP Port Configuration interface

SNMP Configuration

Simple Network Management Protocol (SNMP) is the protocol developed to manage

nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP

Summary of Contents for SISGM1040-244






















































































































Search results

Summary of Contents for SISGM1040-244

Reviews:

Related manuals for SISGM1040-244

Brands by name

Popular brands

Transition Networks SISGM1040-244, User Manual

Search results

Summary of Contents for SISGM1040-244

Reviews:

Related manuals for SISGM1040-244

Brands by name

Popular brands