Transition Networks
SGPAT10xx-x05 PoE+ Converter User Guide
33719 Rev. C
https://www.transition.com
Page
36
of
49
Auto Negotiation (AN) enable for TP ports or AN disable with port forced mode (n Command)
This command lets you view and configure SGPAT Auto Negotiation, Speed, and Duplex settings.
n
– Auto Negotiation (AN) {PORT 1-2} {Forced: 0 | Enable: 1} {Forced Mode 1-4}
Type
n
and press the Enter key to display the current stored Auto Negotiation setting.
Type
n11
and press the Enter key to enable Auto Negotiation on TP port 1.
Type
n21
and press the Enter key to enable Auto Negotiation on TP port 2 (only when TP port 2 is present).
Type
n101
and press the Enter key to disable Auto Negotiation and force TP port 1 to 100Base full duplex mode.
Type
n102
and press the Enter key to disable Auto Negotiation and force TP port 1 to 100Base half-duplex mode.
Type
n103
and press the Enter key to disable auto negotiation and force TP port 1 to 10Base full duplex mode.
Type
n104
and press the Enter key to disable Auto Negotiation and force TP port 1 to 10Base half-duplex mode.
Type
n201
and press the Enter key to disable Auto Negotiation and force TP port 2 to 100Base full duplex mode
(only when TP port 2 is present).
Type
n202
and press the Enter key to disable Auto Negotiation and force TP port 2 to 100Base half-duplex mode
(only when TP port 2 is present).
Type
n203
and press the Enter key to disable Auto Negotiation and force TP port 2 to 10Base full duplex mode
(only when TP port 2 is present).
Type
n204
and press the Enter key to disable Auto Negotiation and force TP port 2 to 10Base half-duplex mode
(only when TP port 2 is present).
Operation is the same on all models.
n Command Example:
%
n
– Auto Negotiation(AN) {PORT 1-2)} {Forced:0 | Enable:1}{Forced Mode 1-4}:
1- 100FULL, 2-100HALF, 3-10FULL, 4-10HALF
example: n101 – AN Port 1 Forced to Speed:100M Duplex:Full,
n21 – AN Port2 Enable
%
n
Auto Negotiation: Port 1 Enable
Auto Negotiation: Port 2 Enable
%
n
– Auto Negotiation(AN) {PORT 1-2)} {Forced:0 | Enable:1}{Forced Mode 1-4}:
1- 100FULL, 2-100HALF, 3-10FULL, 4-10HALF
example: n101 – AN Port 1 Forced to Speed:100M Duplex:Full,
n21 – AN Port2 Enable
%
