Transition Networks
SGPAT10xx-x05 PoE+ Converter User Guide
33719 Rev. C
https://www.transition.com
Page
34
of
49
PSE Port Legacy Detect Mode (l Command)
This command displays the current stored PSE Port Legacy Detect Mode (enabled or disabled).
l
– PSE Legacy Mode {Port 1-2} {Disable:0 | Enable:1 }
Type
l
and press the Enter key to display the current stored PSE Port Legacy Detect Mode.
Type
l10
and press the Enter key to disable legacy detection mode and use standard IEEE detection on Port 1.
Type
l11
and press the Enter key to enable legacy detection mode only on Port 1.
Type
l20
and press the Enter key to disable legacy detection mode and use standard IEEE detection on Port 2.
Type
l21
and press the Enter key to enable legacy detection mode only on Port 2.
Model Descriptions
SGPAT1013-105
,
SGPAT1039-105
,
SGPAT1040-105
,
SGPAT1040-205
: Copper Port 1 of these models will enable
and disable the support for legacy type PD devices.
SGPAT1040-305
: Both Copper Ports 1and 2 of this model will enable and disable the support for legacy type PD
devices.
l Command Example:
%l ?
PSE Legacy: Port 1 Disabled(IEEE 802.3 at/af Devices Detected)
PSE Legacy: Port 2 Disabled(IEEE 802.3 at/af Devices Detected)
%l11
PSE Legacy Mode Stored
%l?
PSE Legacy: Port 1 Enable(Only Legacy Devices Detected)
PSE Legacy: Port 2 Disabled(IEEE 802.3 at/af Devices Detected)
%
