background image

Installation  . . . . . . . . . . . . . . . . . .2
Operation  . . . . . . . . . . . . . . . . . . .6
Cable Specifications  . . . . . . . . . . .7
Technical Specifications  . . . . . . . .8
Troubleshooting  . . . . . . . . . . . . . .9
Compliance Information  . . . . . . .12

* Typical maximum cable distance. Actual

distance is dependent upon the physical
characteristics of the network.

CSDTF3027-115

75 ohm BNC coax
100 m (328 ft.)*

ST, 1300 nm multimode
5 km (3.1 miles)*

Part Number

Port One - 

Copper

Port Two - 

Duplex Fiber-Optic

CSDTF3011-115

75 ohm BNC coax
100 m (328 ft.)*

ST, 850 nm multimode
2 km (1.2 miles)*

CSDTF3012-115

75 ohm BNC coax
100 m (328 ft.)*

ST, 1310 nm single mode
8 km (4.8 miles)*

CSDTF3013-115

75 ohm BNC coax
100 m (328 ft.)*

SC, 850 nm multimode
2 km (1.2 miles)*

CSDTF3014-115

75 ohm BNC coax
100 m (328 ft.)*

SC, 1310 nm single mode
20 km (12.4 miles)*

CSDTF3015-115

75 ohm BNC coax
100 m (328 ft.)*

SC, 1310 nm single mode
40 km (24.8 miles)*

CSDTF3016-115

75 ohm BNC coax
100 m (328 ft.)*

SC, 1310 nm single mode
60 km (37.3 miles)*

CSDTF3017-115

75 ohm BNC coax
100 m (328 ft.)*

SC, 1550 nm single mode
80 km (49.7 miles)*

CSDTF3018-115

75 ohm BNC coax
100 m (328 ft.)*

MT-RJ, 1300 nm multimode
2 km (1.2 miles)*

CSDTF3022-115

75 ohm BNC coax
100 m (328 ft.)*

ST, 1310 nm single mode
15 km (9.3 miles)*

CSDTF3025-115

75 ohm BNC coax
100 m (328 ft.)*

MT-RJ, 1310 nm single mode
20 km (12.4 miles)*

User’s Guide

CSDTF30xx-11x

Slide-in-Module Media Converter

E1 with Remote Management

Coax (BNC) to Fiber

Transition Networks CSDTF30xx-11x series media
converter, designed to be installed into the Transition
Networks 

PointSystem™

chassis, encodes and decodes

E1 coax copper signals over fiber optic cable to extend
the distance and transmission reliability of high-speed E1
data traffic.  The CSDTF30xx-11x is framing independent

(as ESF vs. D4) and supports all common line codes (e.g., AMI, B8ZS, HDB3). 

The CSDTF30xx-11x is designed to be installed in pairs.  For example, install one
CSDTF3011-115 as the local media converter and another CSDTF3011-115 as the
remote media converter.

Summary of Contents for CSDTF30xx-11x








Reviews: