background image

9

CPSMC08xx-100  PointSystem

Chassis

slide-in-modules

24 hour Technical Support:

1-800-260-1312

-- International:

00-1-952-941-7600

2.2

Management Modules

Optional network management is provided by SNMP software embedded in
Transition Networks 

PointSystem

management module(s) that can be installed in

the CPSMC08xx-100 chassis. 

Transition Networks provides two such modules:  

CPSMM-120 Single-Slot Master Management Module.   

CPSMM-200 Dual-Slot Master Management Module. 

Along with an additional expansion module:

CPSMM-210 Single Slot Expansion Management Module

2.2.1

Three Types of Management Modules

CPSMM-120 Single-Slot Master Management Module

The optional CPSMM-120 Single-Slot Master Management Module can
be installed to enable network management of a single CPSMC08xx-
100 chassis .  

Refer to the CPSMM-120 user’s guide for more information on the
CPSMM-120 Single-Slot Master Management Module.

CPSMM-200 Dual-Slot Master Management Module

The optional CPSMM-200 Dual-Slot Master Management
Module can also be installed in the CPSMC08xx-100 chassis to
enable network management.  

This module has all of the features of the CPSMM-120 plus a pair
of cascade ports,  which allow multiple 

PointSystem

chassis to

be connected.  

Note also that this module requires 

two

adjacent slots in the

CPSMC08xx-100 chassis for installation.  

Refer to the CPSMM-200/-210 user’s guide for more information
on the CPSMM-200 Dual-Slot Master Management Module.

CPSMM-210 Single-Slot Expansion Management Module

The CPSMM-210 is used with the CPSMM-200 to connect up to eight (8)

PointSystem™

chassis into one manageable stack.  

Refer to the CPSMM-200/-210 user’s guide for more information on the
CPSMM-210 Single-Slot Expansion Management Module.

See section 4.3 

Cascade Option 

for details on connecting multiple

CPSMC08xx-100 chassis.

10BASE-T

 

RX

TX

LNK

PWR

RESET

SERIAL

CPSMM120

10BASE-T

 

IN

CPSMM200

OUT

RX

TX

LNK

PWR

RESET

DB-9

RESET

CPSMM210

Power

IN

OUT

Summary of Contents for CPSMC0800-100































Reviews: