Transition Networks CPSMC0800-100, User Manual

Page: 6 / 30

6
CPSMC08xx-100 PointSystem ™ Chassis
slide-in-modules
2 Slide-in-Modules
2.1 Media Converter Slide-in-Modules
Transition Networks media converter slide-in-modules, installed in slots at the front
of the chassis, allow the network administrator to connect various copper and fiber-
optic network media over protocols that include Ethernet, Fast Ethernet, DS3/E3,
and OC-12 as well as many others (see www.transition.com for a complete listing.)
NOTE: Refer to the user’s guide that comes with each media converter slide-in-
module for specific information on the module’s cables, connectors, and LED
indicators.
2.1.1 Chassis Face Plates
CAUTION: Slots in the CPSMC08xx-100 chassis without a slide-in-module
installed MUST have a protective chassis face plate (P/N CPSFP-200) covering the
empty slot for Class A compliance.
Install a chassis face plate over any unused chassis slot by aligning the hole in the
face plate with the threaded hole in the chassis. Secure the face place with the
enclosed bolt.
2.1.2 Calculating the Power Consumption
CAUTION: Before installing the media converter slide-in-modules, refer to the
power consumption data for each individual media converter (provided in the
User’s Guide shipped with each media converter).
The combined power
consumption of all devices must not exceed the available power supply. Failure to
observe this caution could result in diminishing system reliability.
In other words, the combined wattage of the CPSMC08xx-100 chassis plus all slide-
in-modules must be less than the available power.
Contact Transition Networks Tech Support to ensure the power requirements for
your specific application do not exceed the available power.
24 hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
RX TX
LNK
PWR
RESET
DB-9
CFETF1
10
SPD
PWR
FRX CRX
FLNK
CLNK
10/100TX
RX
TX
10/100SX
LKS
PWR
LKM
Multimode Singlemode
TX RX TX RX
CFETF1
10
SPD
PWR
FRX CRX
FLNK CLNK
10/100TX
RX TX
10/100SX
CPSMC-0800
8-Slot Chassis
Mpls, MN 55344 Mpls, MN 55344
Input Power: Input Power:
110-240 VAC
110-240 VAC
1.6A max. (60W max)
1.6A max. (60W max)
50/60 Hz
50/60 Hz
Chassis Face Plate