background image

Model 0403

6

9

Ethernet™ Pocket Hub™

Connecting 10BaseT  Cable

(continued)

Connecting to External Hub through Wall Outlet

Use a crossover cable to connect Pocket Hub to the wall plate.
Use a straight through cable to connect Pocket Hub to terminal
devices.

Connecting two Pocket Hubs

Use a crossover cable to connect Pocket Hubs.
Use a straight through cable to connect Pocket Hub to terminal
devices.(using straight through cable orientation) or to Pocket Hub
RJ-45 jack connector (using crossover cable orientation).

wall plate

#1

Ethernet

Pocket Hub

networks

TRANSITION

Mpls, MN 55344

Straight-through 10BaseT

Crossover 10BaseT

Ethernet

Pocket Hub

networks

TRANSITION

Mpls, MN 55344

Straight-through 10BaseT

Crossover 10BaseT

#2

Ethernet

Pocket Hub

networks

TRANSITION

Mpls, MN 55344

Ensuring Correct 10BaseT Configuration

The 10BaseT cable and RJ-45 jacks for Hub to Terminal connections
must be configured as straight through. The 10BaseT cable and RJ-45
jacks for Hub to Hub connections must be configured as crossover.

1

8

RJ-45

 

P

LUG

RJ-45

 

J

ACK

1

8

2 3 4 5 6 7

The two active pairs  in a
10BaseT network are pins
1 & 2 and pins 3 & 6. Use
only dedicated wire pairs
(such as blue/white &
white/blue, orange/white
& white/orange) for the
active pins.

Crossover Cable 

at RJ-45 Plug

Hub   . . . . . . . . . . . . . . .Hub

RJ-45 Male   . . . . . . . . . . . . . . .RJ-45 Male

1  . . . . . . . . . . . . . . . . . . .3
2  . . . . . . . . . . . . . . . . . . .6
3   . . . . . . . . . . . . . . . . . .1
6   . . . . . . . . . . . . . . . . . .2

Straight Through Cable

at RJ-45 Plug

Hub . . . . . . . . . . . . . . . .PC, transceiver, NIC, printer

RJ-45 Male   . . . . . . . . . . . . . . .RJ-45 Male

1  . . . . . . . . . . . . . . . . . . .1
2   . . . . . . . . . . . . . . . . . .2
3   . . . . . . . . . . . . . . . . . .3
6  . . . . . . . . . . . . . . . . . . .6

Summary of Contents for 403











Reviews: