TransCore AI1401, User Manual

Page: 34 / 42

AI1401 Reader User Guide
A-8
Response
!Done
or
!Error
Enables Real-Time Transmission to Host
!305
(factory setting)
When a tag is acquired via the RF source, its ID is immediately sent out on the RS
–
232C port. The tag ID is not stored in the data buffer. Previously stored data, while in
the non-transmission mode (command !304), is retained and not cleared from the data
buffer.
Response
!Done
or
!Error
Disables Uniqueness Mode
!306
The reader acquires and stores (or sends to the RS–232C port) the same tag ID when
the user-provided RF actuator on the reader is pressed. Uniqueness of tag IDs is not
maintained while in this mode.
Response
!Done
or
!Error
Enables Uniqueness Mode
!307
(factory setting)
Tag ID uniqueness is maintained while in this mode. At least one unique tag ID must
be read before the previously acquired tag ID reads and is stored again.
Response
!Done
or
!Error