manualshive.com logo in svg

Transcend TS-USL3, User Manual, Page: 63 / 67

Share
Download
Transcend TS-USL3 User Manual Download Page 63

  

                   BIOS UPGRADE       

                  59

Your system could be damaged if the wrong BIOS version is
accidently used. If you are not sure what version you should
choose, please contact us at: [email protected]

Warning :

5.3 How to Upgrade Your Motherboard BIOS

Please follow these 5 steps listed below to upgrade your BIOS.

Step 1: Make a record of your original or existing BIOS Setup parameters.

- Press [Del] during the Power On Self Test to enter BIOS Setup Program when you

  start your system.

- Write down the value of each parameter in order to reconfigure your system after

  BIOS updating.

Step 2: Make a System Disk

- Put a clean 3.5" disk in Drive A

  MS-DOS:  Key in Format A:/S  and press [Enter].

  Windows O/S:  Select the My Computer icon.

Click [3.5" Floppy (A:)]

Select [File/Format] from Command Bar

Under Format 3.5 Floppy (A:) Menu select

Format type = Full item, and

Other Options = Copy system files

Click [Start] button

Step 3: Download the updated Bios.exe file from the web site to a floppy disk.

     (Ref 5.1 and 5.2)

Step 4: Type Bios.exe  to decompress it.

Step 5: Please read the file Readme.txt carefully, and follow the instructions step by

            step.

Finish the BIOS upgrade.

Summary of Contents for TS-USL3




































































Reviews:

No comments