manualshive.com logo in svg

Transcend TS-USL3, User Manual, Page: 44 / 67

Share
Download
Transcend TS-USL3 User Manual Download Page 44

 40                                

BIOS SETUP

3.7 Power Management Setup

The Power Management Setup allows you to configure your system to minimize energy

consumption, according to your own style of computer use.

•     

ACPI Function

 This item allows you to enable/disable the Advanced Configuration and Power Interface

 (ACPI).

• 

• 

• 

• 

• 

ACPI Suspend Type

 Select the ACPI Suspend Type:  “S1 (POS)” or “S3 (STR)”.

 If your expansion cards do not support the STR function, you must leave this field on “S1

(POS)” setting.  The STR (Suspend-to-RAM) is an energy-saving feature.  It takes only a few

seconds to wake up the system and return to the previous situation.

 NOTE:  This feature (STR) requires an ATX power supply with at least 720mA + 5V

               standby power for ACPI functions.  Otherwise, the system will fail to return

               from suspend mode.

•     

Power Management

 This category allows you to select the type (or degree) of power saving and is directly

 related to the following modes:

Summary of Contents for TS-USL3




































































Reviews:

No comments