manualshive.com logo in svg

Transcend TS-USL3, User Manual, Page: 28 / 67

Share
Download
Transcend TS-USL3 User Manual Download Page 28

Back Panel I/O Ports

1. PS/2 Mouse

2. PS/2 Keyboard

5. Parallel Port

(Printer)

3. USB2

6. COMA

7. VGA Port

8. Game/MIDI Port

9. Line_out

10. Line_in

3. USB1

11. MIC in

4. LAN

(TS-USL3/N only)

 24            

  HARDWARE INSTALLATION

3.  USB (Universal Serial Bus) Ports 1 & 2 (Black two 4-pin USBs) & LAN Port (Black 8-

     pin LAN For TS-USL3/N TS-USP3/N only)

4.  Parallel Port (Burgundy 25-pin PRN)

5.  Serial Port COMA (Turquoise 9-pin COMA)

6.  Display VGA Port (Blue 15-pin VGA)

7.  Game Port/MIDI Port (Gold 15-pin GAME)

8.  Line_out (Lime Green 1/8” LINE_OUT)(TS-USL3,TS-USL3/N only)

9.  Line_in (Light blue 1/8” LINE_IN)

10.  MIC_in (Pink 1/8” MIC)

2.5 External Back Panel I/O Ports

There are 10 kinds of external connectors on the back panel of the motherboard.

The view angle of drawing shown here is from the back panel of the housing.

1.  PS/2 Mouse Port (Green 6-pin MOUSE

2.  PS/2 Keyboard Port (Purple 6-pin KB)

Summary of Contents for TS-USL3




































































Reviews:

No comments