manualshive.com logo in svg

Transcend TS-USL3, User Manual, Page: 49 / 67

Share
Download
Transcend TS-USL3 User Manual Download Page 49

3.9 PC Health Status

This menu provides two thermo-protect functions (CPU warning temperature and shutdown

temperature) and a hardware monitor center.  These features let you know the health status of

your PC.

• 

CPU Warning Temperature

This field allows you to set the CPU warning temperature.  You can choose from “50°C/122°F”

to “70°C/158°F” or even “Disabled” if you like.

•

 Current CPU/System Temperature

These two fields display the CPU and the onboard system temperature.(For FC-PGA

CPU only)

• 

Current CPU/Power/Case Fan Speed

These fields display the fan speeds for each of the fans - CPU, Power and Case.

• 

VCORE

This field displays the CPU working voltage.

• 

VTT

This field displays the GTL bus voltage.

• 

+3.3V/+5V/+12V/-12V/-5V

    

These fields show the power supply voltages.

• 

 3.3VSB/5VSB(V)

This field displays the 3.3V/5V standby power supplied to the CMOS battery.

                                 

BIOS SETUP                     

  45

Summary of Contents for TS-USL3




































































Reviews:

No comments