36
BIOS SETUP
•
•
•
•
•
Onboard FDD Controller
You can use this function to enable or disable the onboard FDD controller.
•
•
•
•
•
Onboard Serial Port 1 / Port 2
Select an address and the corresponding interrupt for each of the first and second serial
ports. The Choices are: “Disabled”, “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”,
and “Auto”.
The second serial port shares the resources (address and IRQ) with IrDA.
•
•
•
•
•
UART 2 Mode
Choose the right type of infrared device:
- Standard : Normal operation
- HPSIR : IrDA compliant serial infrared port
- ASKIR : Amplitude Shift Keyed Infrared Port
•
•
•
•
•
IR Function Duplex
Consult your IR peripheral documentation to select the setting for IR “Half” / ”Full” duplex
function.
•
•
•
•
•
TX, RX Invertiog Enable
Consult your IR peripheral documentation to set this field. The item “Yes” means “Low
Active” and “No” means “High Active”.
•
•
•
•
•
Onboard Parallel Port
Select a logical LPT port name and matching address for the physical parallel (printer)
port.
The choices are: “378/IRQ7”, “278/IRQ5”, “3BC/IRQ7” and “Disabled”.
Summary of Contents for TS-AVE3
Page 57: ......
