BIOS SETUP
29
•
Typematic Rate (Chars/Sec)
When the Typematic Rate setting is enabled, you can select a typematic rate (the rate at
which characters repeat) to “6”, “8”, “10”, “12”, “15”, “20”, “24” or “30” characters per
second.
•
Typematic Delay (Msec)
When the Typematic Delay setting is enabled, you can select a typematic delay (the delay
before key strokes begin to repeat) of “250”, “500”, “750” or “1000” milliseconds.
•
Security Option
If you have set a password, you can select whether the password is required while the
system boots, or only when you enter “Setup”.
•
OS Select for DRAM > 64MB
Select “OS2” only if you are running OS/2 operating system with more than 64 MB of RAM
on your system.
•
Video BIOS Shadow
Select “Enabled” to change the video BIOS location form ROM to RAM, where the CPU can
read data through the 64-bit DRAM bus. This can enhance system performance.
•
C8000-DFFFF Shadow
You can shadow the ROM on other expansion cards by setting these fields. If you install
other expansion cards with ROMs, you need to know which address the ROMs use specifically.
Shadowing a ROM reduces the memory available between 640K and 1024K depending on
the used amount.
•
Delay For HDD (Secs)
Generally, you can set this field to “0”. However, for some old Hard Disk Drives, you may
need to increase the delay time for BIOS to detect the right type of HDD.
Summary of Contents for TS-AVE3
Page 57: ......
