manualshive.com logo in svg

Transcend TS-AVD3, User Manual

The Transcend TS-AVD3's comprehensive User Manual is available for free download at manualshive.com. This invaluable manual provides detailed instructions and clear diagrams to help users maximize the potential of their TS-AVD3, ensuring a seamless user experience and full utilization of all features and functions.

Share
Download
background image

2.8 Floppy Disk Drive Connector (34-pin FDC)

This connector supports the provided floppy disk drive ribbon cable. After connecting the

single end to the board, connect the two plugs on the other end to the floppy drives.

2.9 Fan Power Connectors

There are three fan power connectors on the mainboard: CPU-FAN, POWER-FAN, and CASE-

FAN. Each connector pr12V power. Make sure they are in the right orientation, or they

may cause damage. These connectors support cooling fans of 500 mA (6W) or less.

            HARDWARE INSTALLATION          

13

Floppy Disk Drive Connector

Floppy Drive Connector

Note: Orient the red
         stripe next to
         Pin1

Transcend

PIN1

F D C

FAN Connectors

P O W E R - F A N

C A S E - F A N

C P U - F A N

F A N

Rotation

+12V

G N D

Transcend

Summary of Contents for TS-AVD3




















































Reviews:

No comments

Related manuals for TS-AVD3

Beck IPC@CHIP DB54 Hardware Manual preview
IPC@CHIP DB54
Brand: Beck Pages: 24
ST EVAL-L9001 User Manual preview
EVAL-L9001
Brand: ST Pages: 15
Nematron AEMQ77-989 User Manual preview
AEMQ77-989
Brand: Nematron Pages: 47
Texas Instruments LMR38020EVM User Manual preview
LMR38020EVM
Brand: Texas Instruments Pages: 17
QDI Advance 10T Series Manual preview
Advance 10T Series
Brand: QDI Pages: 74
Mini-Itx P55-T36 User Manual preview
P55-T36
Brand: Mini-Itx Pages: 174
DFI EL620-C User Manual preview
EL620-C
Brand: DFI Pages: 120
Gigabyte 686LX4 User Manual preview
686LX4
Brand: Gigabyte Pages: 18
IEI Technology KINO-QM57A User Manual preview
KINO-QM57A
Brand: IEI Technology Pages: 160
Analog Devices AD9910 User Manual preview
AD9910
Brand: Analog Devices Pages: 17
ASROCK Z590 Taichi Manual preview
Z590 Taichi
Brand: ASROCK Pages: 257
Honda BF200D Manual preview
BF200D
Brand: Honda Pages: 152
ASROCK 880GM-LE - V1.0 User Manual preview
880GM-LE - V1.0
Brand: ASROCK Pages: 60
Supero SUPER 370SBA User Manual preview
SUPER 370SBA
Brand: Supero Pages: 92
ASROCK K7 JUMPER Manual preview
K7 JUMPER
Brand: ASROCK Pages: 20
EPOX mu-3vsa User Manual preview
mu-3vsa
Brand: EPOX Pages: 64
Biostar T41 HD Setup Manual preview
T41 HD
Brand: Biostar Pages: 55
urmet domus iPervoice 1039/56 Quick Start Manual preview
iPervoice 1039/56
Brand: urmet domus Pages: 3

Brands by name

Popular brands

Load more brands