CHAPTER 3 BIOS SETUP
3.1 BIOS Setup
Award BIOS has a built-in Setup program that allows users to modify the basic system
configuration. This information is stored in CMOS RAM. So it can retain the Setup information
when the power is turned off. When the battery of CMOS fails, it will cause the data to be lost.
When this happens, you should set up your configuration parameters again after replacing the
battery.Please refer to Section 1.1,Essential Handing Precautions (Page1.)
3.2 The Main Menu
As you turn on or reboot the system, the BIOS is immediately activated. It will read the system
configuration information, and check the system through Power On Self Test (POST). During
the POST process, press the [Del] key, and you can enter the Award BIOS configuration
system. The following screen will appear.
In the Award BIOS system, you can use the arrows (
) to highlight the item, and
press the [Enter] key to enter the sub-menu. The following keys help you navigate in Setup.
[Esc]
Main Menu: Quit and not save changes into CMOS RAM
Other pages: Exit current page and return to Main Menu
[PgUp] Increase the numeric value or make changes
[PgDn] Decrease the numeric value or make changes
[ + ]
Increase the numeric value or make changes
[ - ]
Decrease the numeric value or make changes
20
BIOS SETUP
Summary of Contents for TS-AVD3
Page 51: ......
