TS-AKT4 Family
•
PM Control by APM
When “Yes”, an Advanced Power Management device will be activated to enhance the
Max Power Saving mode and stop the CPU internal clock.
•
Video Off Option
When “Enabled”, this function allows the VGA adapter to operate in a power saving
mode.
−
Always On: Monitor will remain on during power saving modes.
−
Suspend Off: Monitor blanked when the system enters the supend mode.
−
All Modes: Monitor blanked when the system enters any power saving mode.
•
Video Off Method
Defines the Video Off features
−
Blank Screen: Only blanks the screen. Use this for monitors without power
management and “green” features.
−
V/H SYNC+Blank: Blanks the screen and turns off vertical and horizontal scanning
−
DPMS Support: The DPMS (Display Power Management System) feature allows
the BIOS to control the video display card if it supports the DPMS feature.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: “N/A”, “3”, “4”,
“5”, “7”, “9”, ”10”, and “11”.
•
Soft-Off by PWRBTN
When set to “Instant-off”, the ATX switch can be used as a normal system Power-Off
button. When set to “Delay 4 seconds”, you need to press the ATX switch down for
more than 4 seconds if you want to Power-Off the system with this switch.
•
State After Power Failure
This item determines what power state you wish the system to go into after a power
failure event. Selections are: “Auto”, “On”, and “Off”.
39
BIOS SETUP
