BIOS SETUP
30
•
DRAM Clock
Set the clock frequency of the DRAMs. Selections are: “100” and “133”.
•
SDRAM CAS Latency
This controls the SDRAM performance, default is “3” clocks. If your SDRAM DIMM
specification is 2 CAS latency, change “3” to “2” for better performance.
•
Bank Interleave
This function allows you to enhance the DRAM performance. Selections are: “Dis-
abled”, “2 Bank”, and “4 Bank”.
•
DRAM Drive Strength
Selections are: “Auto” and “Manual”. Selecting “Manual” allows you to set the DRAM
Drive Value.
•
DRAM Drive Value
This item lets you set the DRAM Drive Value (00~FF).
•
Memory Hole
Selections are: “Disabled” and “15M-16M”. “15M-16M” enables this feature, reserving
memory address space (between 15 and 16MB) to ISA expansion cards that specifically
require this setting. This makes between 15 and 16MB of memory unavailable to the
system. Expansion cards can only access memory up to 16MB. The default setting is
“Disabled”.
•
PCI Master Pipeline Req
If “Enabled”, this option will enhance the system’s performance.
•
P2C/C2P Concurrency
When “Disabled”, the CPU bus will be occupied during the entire PCI operation period.
•
Fast R-W Turn Around
DRAM optimization feature: If a memory read is addressed to a location whose latest
write is being held in a buffer before being written to memory, the read is satisfied
through the buffer contents, and the read is not sent to the DRAM. The choices are:
“Enabled” and “Disabled”.
•
System BIOS Cacheable
Selecting “Enabled” allows caching of the system BIOS. This action can increase system
performance.
Transcend Information, Inc.
