Transcend TS-ABD4 Series User Manual Download Page 44

Page: 44 / 52

TS-ABD4

BIOS SETUP

•

PCI/VGA Palette Snoop

Some VGA cards, such as graphics accelerators or MPEG video cards, might not show

colors properly. Select “Enabled” to correct this problem. If you don’t have such problems,

leave this field at “Disabled”.

3.9 PC Health Status

This menu provides two thermo-protection functions (CPU warning temperature and shutdown

temperature) and a hardware monitoring center. These features let you know the health status

of your PC.

•

CPU Warning Temperature

This field allows you to set the CPU warning temperature. You can choose from “50°C/

122°F” to “70°C/158°F” or even “Disabled” if you like.

•

Current Power/CPU/System Temperature

These three fields display the CPU, Power, and on-board system temperature.

•

Current CPU/System/Chassis Fan Speed

These fields display the fan speeds of the CPU fan, System fan and Chassis fan.

•

VCORE

This field displays the CPU working voltage.

•

+3.3V/+5V/+12V/-12V/-5V

These fields show the power supply voltages.

Summary of Contents for TS-ABD4 Series





















































Search results

Summary of Contents for TS-ABD4 Series

Reviews:

Related manuals for TS-ABD4 Series

Brands by name

Popular brands

Transcend TS-ABD4 Series, User Manual

Search results

Summary of Contents for TS-ABD4 Series

Reviews:

Related manuals for TS-ABD4 Series

Brands by name

Popular brands