BIOS SETUP
32
•••••
Power On Function
−−−−−
Password: Power On only if you key in the correct password.
−−−−−
Hot Key: You can use a hot key to Power On the system.
−−−−−
Mouse Left: Power On with the Mouse Left Button.
−−−−−
Mouse Right: Power On with the Mouse Right Button.
−−−−−
Any Key: Press any key to Power On the system.
−−−−−
Button only: Power On only by pushing the button on the case (Default).
−−−−−
Keyboard 98: You can Power On the system by pushing the [Power-On] key on a
Keyboard 98.
•••••
KB Power On Password
Enter the Power On Passward here. Activated only when “Password” is selected in
the Power On Function Menu (See above).
•••••
Hot Key Power On
Choose [CTRL] +[ F1] ~ [F12] as a hot key to Power On the system. Activated only
when “Hot Key” is selected on the Power On Function Menu (See above).
•••••
Onboard FDC Controller
You can use this function to “enable” or “disable” the onboard FDC controller.
•••••
Onboard Serial Port 1/Port 2
Select an address and the corresponding interrupt for each of the first and second serial
ports. The choices are: “Disabled”, “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”,
and “Auto”.
The second serial port shares resources (address and IRQ) with IrDA.
•••••
UART Mode Select
Choose the right type of infrared device:
−−−−−
IrDA: IrDA compliant serial infrared port
−−−−−
ASKIR: Amplitude Shift Keyed Infrared Port
−−−−−
Normal: Normal operation
•••••
RxD, TxD Active
Consult your IR peripheral documentation to select the correct combination of RxD and
TxD (“Hi, Hi”, “Hi, Lo”, “Lo, Hi”, or “Lo, Lo”).
Transcend Information, Inc.
