7
HARDWARE INSTALLATION
100/133MHz FSB Configuration Jumper
J P 5
A u t o
(Default)
Transcend
1 3 3 M H z
2.3. 100/133 MHz System Configuration
The JP5 Jumper allows you to set the FSB (Front Side Bus) to 100/133MHz configuration. When
the Jumper is set to “Auto”, the freqency range depends on your CPU type. When you set the
FSB to 100MHz, you can select a system bus frequency from 100MHz to 133MHz.
2.4 Using Jumper JP3 to clear CMOS
To clear the CMOS data, you should turn off your computer’s power and put Jumper JP3 in the
position as shown below.
C l e a r C M O S
N O R M A L
J P 3
Clear COMS Jumper
Transcend
TS-ABD4
