Page 3-3
postal insurance. If the amount is over $100, the scale automatically includes
postal insurance.
•
Certified
-
If this service is selected, the appropriate fee for the transaction is
applied to the displayed rate.
•
Return Receipt
-
If this service is selected, the appropriate fee for the transac-
tion is applied to the displayed rate.
•
Collect On Delivery (C.O.D.) -
If this service is selected, the scale displays
“
Enter Val = 0”
. Once the value is entered, the appropriate fee for the trans-
action is applied to the displayed rate.
•
Insurance -
If this service is selected, the scale displays “
Enter Val = 0”
. and
allows you to enter the insured amount. After an amount is entered the appropri-
ate fee for the transaction is applied to the displayed rate.
•
Special Delivery
-
If this service is selected, the appropriate fee for the trans-
action is applied to the displayed rate.
3.2.2.2
ZIP/ZONE KEY
The ZIP/ZONE key is used to change the current ZIP code or zone. If three digits
are entered, the scale assumes a new ZIP code has been entered. If a one or two
digit code has been entered using the ENTER key, the scale assumes a new zone
has been entered.
3.2.2.3
CLEAR (NO) KEY
The CLEAR/RESET key is used to clear the current entry, clear the special service
fees applied or to answer a YES/NO question. If an incorrect data entry is made,
pressing this key will only clear the current data from the display.
3.2.2.4
ZERO KEY
The ZERO key is used to Zero the scale. When this key is selected, the scale zeros
the weight.
3.2.2.5
ENTER (YES) KEY
The ENTER (YES) key is used to accept data when in data entry mode or answer a
YES/NO question.
3.2.3 FUNCTION KEYS
The function keys are used to access less frequently used scale operations.
3.2.3.1
STAR (*) KEY
The STAR (*) key is used to briefly display the actual rate charged by the carrier
selected. This is used in conjunction with the handling charge feature described in
section 6.2.2.
3.2.3.2
PIECE COUNT
The Piece Count function puts the scale into a counting mode. Refer Section 5.1
for the Piece Count operation procedure. Note that the counting mode is not avail-
able for legal for trade applications.
