Rev G
Page 31
Chapter 7: Assembly/Disassembly
Precautions for Disassembly
Before disassembling any part of the printer, be sure the power is turned off. The
Controller Board and the Power Board can easily be damaged by static electricity.
Observe ESD precautions. Wear a grounded wrist strap, and use a static mat or
other protected work surface.
Necessary Tools
Using the wrong tools may cause personal injury or damage to the printer. Be sure
to use the proper tools when maintaining or servicing the printer. The following list
provides the necessary tools to properly disassemble the
Model 750
Printer.
•
Screwdrivers
#0 Phillips
#1 Phillips
#2 Phillips
•
Small Flat Blade
•
Large Flat Blade
•
Nut Drivers
•
Small Needle-Nose Pliers
Model 750 OEM Variations Notice
This Model 750 has most likely been incorporated into another Original Equipment
Manufacturer’s product. Due to this your unit’s design my vary from the specifications
and options shown here. All of the content of this manual, is reflective of the TransAct
Model 750 Printer including all of its available options. TransAct does not assume
support responsibility for parts other than what is shown in this manual.
