TransAct EPIC 630, Programmer'S Manual

Page: 40 / 200

$ 7 &
'
&& 8 ,
Remote configuration is provided for all printers, and is accessed through a series of
extended diagnostic and configuration commands. The TransAct universal configuration
program will allow the configuration to be read, edited, and written back to the printer. It
will also allow the configuration of one printer to be recorded and replicated over a
number of printers. The program is available from TransAct Technical Support or by
downloading it from the Internet – consult the section On-line Technical Support for
further details.
0
The TransAct® EPIC 630 printer is equipped with a special boot loader feature that will
allow field updates of the printers firmware. This loader is started by command and then
a TransAct firmware load image is sent to the printer. When the load image is
successfully received by the Remote boot loader the printer will automatically reset and
operate with the updated code. If for any reason the firmware update fails, the printer
will remain in Remote Boot load mode until a successful load is accomplished.