Page 40 of 57
6.2 Trimble
Trimble 2101 Approach Plus GPS Receiver
Trimble Signal
Trimble 2101
Port 1
Trimble 2101
Port 2
SSD120-(XX)N-RS5
Serial Data D-Sub Receptacle
RxD+
7
24
1, 4, 5, 7, 11, 13 (choose one)
RxD-
8
36
6, 8, 12, 14, 15 (choose one)
Ground
3 or 20
3 or 20
1, 4, 5, 7, 11, 13 (choose one)
Protocol assignment, jumper
pin 10 to ground.
Optional, jumper pin 2 to ground for 10'
resolution.
Trimble 2101 Approach Plus GPS Receiver Software Configuration - Installation Setup
Access the 2101 installation setup submenu and go to the SERIAL I/O SETUP. Select the GPS
serial port which is to receive the pressure altitude data,
SERIAL-1
IN
or
SERIAL-2 IN.
Set data format to
ENCODER
.
2101 I/O Approach Plus GPS Receiver
Trimble
Signal
Trimble 2101 I/O
Serial Port 1
Trimble 2101
I/O
Serial Port 2
SSD120-(XX)N-RS232
Serial Data D-Sub Receptacle
RxD+
J1-7
J1-24
1, 4, 5, 7, 11, 13 (choose one)
RxD-
J1-8
J1-36
6, 8, 12, 14, 15 (choose one)
Ground
J1 - 3 or 20
J1 - 3 or 20
1, 4, 5, 7, 11, 13 (choose one)
Protocol assignment, jumper
pin 10 to ground.
Optional, jumper pin 2 to ground for 10'
resolution.
2101 I/O Approach Plus GPS Receiver Software Configuration - Installation Setup
Access the 2101 installation setup submenu and go to the SERIAL I/O SETUP. Select the GPS
serial port, which is to receive the pressure altitude data,
SERIAL-1 IN
or
SERIAL-2 IN.
Set data
format to
ENCODER
.
Summary of Contents for SSD120-N-RS5
