Page 39 of 57
Section 6.0 GPS/MFD & Miscellaneous Connection Data
Given the speed with which new GPS and MFD units are entering the market, it is impossible to provide data on
every device. The following digitizer/GPS interconnections are provided as a quick reference only, and though they
are correct to the best of our knowledge, always consult the latest installation, operation, and service bulletins from
the GPS or MFD manufacturer.
6.1 UPS Aviation Technologies (IIMorrow)
Apollo Model GX50, GX60, GX65
Apollo GX50, GX60,
GX65
Signal
Apollo
37 Pin D-Sub
Connector
SSD120-(XX)N-RS5
Serial Data D-Sub Receptacle
RxD2
21
6, 8, 12, 14, 15 (choose one)
Ground
20
1, 4, 5, 7, 11, 13 (choose one)
Optional, jumper pin 2 to ground for
10' resolution.
Apollo GX50, GX60, GX65 Software Configuration
In test mode, rotate
the
Large
knob to
select serial port configuration
RX.
Press
SEL,
rotate the large knob to select the
RxD2
port, rotate the small knob to select
AltEnc
input.
Apollo Model MX20 Multi Function Display
Apollo MX20
Signal
Apollo
37 Pin D-Sub
Connector
SSD120-(XX)N-RS5
Serial Data D-Sub Receptacle
RxD2
21
6, 8, 12, 14, 15 (choose one)
Ground
3
1, 4, 5, 7, 11, 13 (choose one)
Optional, jumper pin 2 to ground
for 10' resolution.
Apollo MX20 Software Configuration
Under External Data Source set altitude source to
Port 2
.
Summary of Contents for SSD120-N-RS5
