Page 33 of 57
Table IV Garmin
Serial Data Connection for the Garmin GTX327 Transponder
SSD120-(XX)N-RS5
Serial Data Receptacle
Function
GTX327
25 Pin Connector
6, 8, 12, 14, 15 (choose one)
TxD to RxD
19
1,4,5,7,11,13 (choose one)
Data Ground
13 or 25
Protocol: connect pin 10 to
ground.
Serial Data Connection for the Garmin GTX330 and 330D Transponder
SSD120-(XX)N-RS5
Serial Data Receptacle
Function
GTX330
62 Pin Connector
6, 8, 12, 14, 15 (choose one)
TxD to RxD
24 (RS232 In 2)
1,4,5,7,11,13 (choose one)
Data Ground
DataGround
Protocol: connect pin 10 to
ground.
To allow the
Garmin GTX 327, 330 and 330D
transponders to communicate with the SSD120-(XX)N-RS5 go to the
Setup Page
and set
the
Altitude Source (ALT SRC)
to receive data in the
Icarus RS232 format.
Summary of Contents for SSD120-N-RS5
