background image

 

Copyright © 1999 Sunstream Wireless, LLC  All rights reserved. 

10

Mechanical and Environmental 

 

General 
Material:  Powdercoated Aluminum base with polycarbonate radome 
Size:   12.5”x5”x8” including mounting studs 
Weight:   4  lb 
Mounting:  Grey steel pole mount provided 
 
Connectors/Indicators 
RF Output: Direct connect to antenna per Part 15C, 15.203. 
 
FCC Compliance: The transceiver shall comply with the following: 

  FCC Part 15.247 
 FCC Part 15.207(a) 

      

Serial Interface:  RJ11 connector 
LAN Interface  Shielded RJ45 connector 
Power:   Carried on 4 unused pins of Ethernet cable  
 
Environmental 
Operating Temp: -40 to 60 deg C  
Storage:  -40 to 85 deg C 
Humidity:  100 % When sealed properly 
NEMA Rating:  NEMA 4X 
Shock:   Sustain 3 axis drop from 5 feet

 

 

 
 
 
 

STANDARD EXTERNAL POWER SUPPLY 

 

 

24 Volt DC Power adapter and J-Box supplied in ODU-PKIT-1 accessory package.

 

 
 

Type:   Linear wallmount transformer 

 Input:  120 VAC 
 Output:  20 VDC +/- 1 V 
 Max current: 1200 mA 

 
 
 

STANDARD ANTENNA  

 

 

 

The unit is designed to operate with the AD5800-27-D dual linear polarized dish antenna. 
See the product specification for more information. 

Summary of Contents for SUNSTREAM WIRELESS M5800SB-SU-EXT












Reviews: