background image

 

Copyright © 1999 Sunstream Wireless, LLC  All rights reserved. 

9

Modulation: 1 MBPS DBPSK for header, 11 MBPS CCK spread spectrum 

for payload 

 

Data Input Section 

 
Buffer size:  128K Bytes  
Data Rate (User): Up to 9.5 MBPS Sustained throughput 
Format:   10/100 BaseT IEEE 802.3 Ethernet compliant 
Ethernet packet size: Up to 1760 byte long packets 
 
Power 
 
Input Voltage: Input voltage range at unit is 10.5 VDC to 24 VDC max  

Power is supplied on Ethernet cable using junction box 
provided with up to 150 foot STP cable.   

 
Current Cons.: 740 mA in transmit mode at max power using 20 V standard 

adapter (14.8W) 
580 mA in receive mode using 20 V standard adapter (11.6 W) 
 

 

Receiver Section 

 
Radio Section 

 
LO Frequencies:  
 
Default channel plan-  Channel 1: 5.256 GHz 

Channel 2: 5.276 GHz 
Channel 3: 5.396 GHz  

   Channel 4: 5.316 GHz 
   Channel 5: 5.336 GHz 
   Channel 6: 5.356 GHz 

    Channels 7-32: not programmed 

 
Cascade Noise Figure:  < 6 dB 
Sensitivity for 1E10-6 BER: - 80 dBm max 1000 byte packets 
Adj. Channel Rejection:  > 20 dB 
Image Rejection:  > 60 dB 
Frequency Plan:  Single conversion, IF at 480 MHz 
LO stability: .00025% PLL stabilized (+/-2.5ppm) over 

temperature range 

Input compression point: > -10 dBm 
 
 

Data Output Section 

 
Buffer size:  128K Bytes 
Data Rate (User): 9.5 MBPS Maximum sustained throughput  
Format:   10/100 BaseT IEEE 802.3 Ethernet compliant 
Supported Protocols: TCP/IP, Telnet, TFTP, UDP 

 
 
 
 

Summary of Contents for SUNSTREAM WIRELESS M5800SB-SU-EXT












Reviews: