![background image](http://html1.mh-extra.com/html/trango-brodband/trangolink-10/trangolink-10_user-manual_1150480024.webp)
Command Set Summary
SNMP
Trango Broadband Wireless — User Manual TrangoLINK Rev. A for F/W Ver. 1.0
Page 21
Command Set Summary
??
OFF = opmode off, ON = opmode on
??
s = serial, e = Ethernet
??
M = Master Only, R = Remote Only
??
+ It may not work properly through http’s command console.
??
good for Master/Remote 1p0
Command
Description
OFF
ON
Remark
!+
redo the last command
s
s
?
same as “help”
se
se
? <command>
same as “help”
se
se
_password <new password> <new
password>
specify new password (max 15 octs)
se
se
baud [9600 | 115200]
display or set console baud rate
se
se
default = 9600 bps
bye
same as “logout”
exit
same as “logout”
freq
display current channel
se
se
freq <ch#> <h | v>
change current channel and polarization
se
se
freq channeltable
display channel table
se
se
freq writechannel [<ch #> <freq>]…
build channel and write to flash
<ch #> = 1..30
se
se
help
display complete help page except “eng”
se
se
help <command>
search and display command’s help
se
se
ipconfig [<new ip> <new subnet mask>
<new gateway>]+
assign radio’s ip, subnet mask and gateway ip
se
se
logout
log out console
se
se
opmode [on|off]
set or display current opmode
se
se
password
specify new password (max 15 octs)
s
s
ping <ip address>
ping local Ethernet device
se
se
It only works for local Ethernet
devices, not SU or any device behind
SU.
power
display default and current tx power level
se
se
default = +18 dBm
power <setism|setunii>
<min|max|<dBm>>*
specify tx power for both band
se
se
SU’s power will be adjusted by AP
when association
re ipconfig <new ip> <new subnet>
assign Remote ipconfg
se
M