Command Set Summary
Channel Planning
Trango Broadband Wireless — User Manual TrangoLINK Rev. A for F/W Ver. 1.0
Page 14
Channel Planning
For installations involving co-location of MU’s, channel planning is of paramount importance. For maximum MU co-
location quantities, it is important to assign frequencies of maximum spacing and alternating polarizations for adjacent
MUs. Use of the 5.3 spectrum U-NII band as well as the 5.8 spectrum ISM band will allow maximum co-location
potential. For very dense deployments of multiple MUs, it may be necessary to use the optional MU Shielding kit in
order to mitigate interference from nearby MUs.
Figure 0-7 Default Channel Table (MHz)
[Ch#01]5736 [Ch#02]5756 [Ch#03]5776 [Ch#04]5796 [Ch#05]5816 [Ch#06]5836
[Ch#07]5260 [Ch#08]5280 [Ch#09]5300 [Ch#10]5320 [Ch#11]5340 [Ch#12]5736
[Ch#13]5736 [Ch#14]5736 [Ch#15]5736 [Ch#16]5736 [Ch#17]5736 [Ch#18]5736
[Ch#19]5736 [Ch#20]5736 [Ch#21]5736 [Ch#22]5736 [Ch#23]5736 [Ch#24]5736
[Ch#25]5736 [Ch#26]5736 [Ch#27]5736 [Ch#28]5736 [Ch#29]5736 [Ch#30]5736
Various MU channel plans can be implemented and many of the factors will depend on the unique circumstances at each
particular site. See
www.trangobroadband.com
for additional information on channel planning schemes.
Installation
Once the site survey is completed, you are ready to install your radios. It is recommended that MUs be installed first.
The reason for this is that the RU has a built-in RSSI tool which will help you properly aim the RU at the MU to achieve
maximum signal strength.
Mounting Hardware
Both MUs and RUs are equipped with a universal mounting bracket which can be used for wall or pole installations. See
diagram below for proper use of the mounting bracket.