TrangoFOX™ Subscriber Unit User Manual
Trango Broadband Wireless
Page
18
Data Input Section
Data Rate (User):
Up to 10 Mbps Sustained throughput
Format:
10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet packet:
Up to 1600 byte long packets
Power
Input Voltage:
Input voltage range at unit is 10.5 VDC to 21 VDC max
Power is supplied on Ethernet cable using junction box provided with up to 330 foot 24 AWG STP cable.
Current Cons.:
400 mA in transmit mode at max power using 20 V standard adapter (8 W)
Data Output Section
Data Rate (User):
10 Mbps Maximum sustained throughput
Format:
10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet Protocols:
TCP/IP, Telnet, TFTP, UDP, HTTP
Physical Interfaces
LAN Interface:
Shielded RJ45 connector
Power:
Carried on 4 unused pins of Ethernet cable
Mechanical and Environmental
General Material:
High Temp ABS/Polycarbonate Enclosure
Size:
6”x3”1.5”
Weight:
1 lb
Mounting:
Polycarbonate Wall/Pole mount bracket
Environmental
Operating Temp:
-40 to 60 deg C
Storage:
-40 to 85 deg C
Humidity:
100 % When sealed properly
NEMA Rating:
NEMA 4
Shock:
Sustain 3 axis drop from 5 feet
Standard Power Supply
20 Volt DC Power adapter and J-Box supplied with product.
Type:
Linear wall mount transformer
Input:
120 VAC
Output:
20 VDC +/- 1 V
Max current:
1200 mA
FCC Compliance
The transceiver shall comply with the following regulations:
FOX5800 and FOX5800-D: FCC 15.247 Spread Spectrum transmitter - 5.725 to 5.85 GHz – EIRP = +36 dBm max
DOX5300: FCC 15.407(2) U-NII Band 2 transmitter - 5.25 to 5.35 GHz – EIRP = +30 dBm max
Subpart B
Class B Digital device verification
Subpart C
FCC 15.203 Antenna connection requirement – non-standard connection
FCC 15.209 Unwanted emissions below 1GHz -
FCC 15.207(a) AC conducted emissions 450Khz to 30 MHz
FCC 15.205 Restricted bands (LO and harmonics)= 54 dBuV average @3 meters
