TrangoFOX™ Subscriber Unit User Manual
Trango Broadband Wireless
Page
7
Figure 6. Radio LEDs and Reset Button
M5300S-FSU
MAC:
S/N:
XXXXXXXXXX
|||||||||||
|||||||||||
|||||||||||
|||||||||||
0001DEFFFFFF
RESET BUTTON
Pressing the Reset Button (while the unit is
powered) will restore the radio’s factory
default IP address and password. The Reset
Button does NOT reset any other parameters.
Basic Configuration
The TrangoFOX can be configured using either the Command Line Interface (CLI) or the Web Browser (HTTP) interface.
This manual covers the basic HTTP screens from the radio’s built in web server. For a more comprehensive description of the
provisioning and management tools, as well as the complete command line interface reference guide, please see the
Access5830 User Manual.
NOTE: The screenshots presented in this manual are from the FOX5800. Similar screenshots are available on the FOX5300
and FOX5800-D
Browser Interface
The Web browser interface is a powerful and easy-to-use configuration and management tool. Its functionality is a subset of
the commands available in the CLI. To use the browser interface – you must have the following:
•
An Ethernet connection between a PC and the radio
•
Setup your Ethernet PC connection to the subnet that is routable to the radio (default IP address=
192.168.100.100
)
•
A web browser (i.e. Microsoft Internet Explorer)
In order to use the browser interface – simply connect the radio to a PC, and type the radio’s IP address into the web browser
(i.e. Microsoft Internet Explorer). This will bring up a logon page.
LED Guide
ACT -
Indicates Ethernet Receive/Transmit activity.
NET –
This LED lights when connected to a 100 BaseT
network. The LED remains unlit when connected
to a 10 BaseT network
RSSI –
Relative Signal Strength Indicator. See page 16 for
more details.
ASSOC – This LED indicates one of four statuses:
1. Off - when there is no power at the
radio.
2. Blinks once every second - unit is
powered on but opmode is OFF.
3. Blinks twice per second - unit is in
opmode SU and scanning for an AP
4. Solid On - unit is associated with an AP..
